I have been playing with one of these units, and noticed that there has been some discussion on them before on this list, so I wondered if anyone might have any suggestions.
Basically, the unit powers up correctly, but the "No GPS" LED never goes off - this obviously could be because it's broken or doesn't like my antenna, but with some of these telecom GPSDOs you have to manually trigger a site survey if you move them to another location. Does anyone know if this Lucent box is like that? Everything else seems to be working - once the "OK" light comes on the 15MHz output is enbled, the "No GPS" LED goes from solid to blinking if you disconnect the antenna - it just doesn't want to get GPS lock. I suppose I could pull the Oncore board (a UT+ according to the label) out of it and test that on it's own - but I thiought I would see if maybe it's a known issue first. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.