Thanks John,
I should be able to sort it out now.
thanks,
Neville Michie
On 29/10/2011, at 7:57 PM, John Miles wrote:
-----Original Message-----
From: time-nuts-boun...@febo.com [mailto:time-nuts-
boun...@febo.com] On Behalf Of Neville Michie
Sent: Friday, October 28, 2011 9:30 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Lady Heather
Hi, I have just been rather surprised to find Seattle co-ordinates
appearing in my Lady Heather window.
I, of course, eventually found that the latest version of John's
program is installed with a link to his TBolt.
My problem is how do you apply the /# command to look at particular
serial port# without having to open a DOS window
and write DOS commands? How do you set up shortcut icons on the
screen to activate a chosen implementation
of LH?
I seem to be able to manipulate the COM# numbers so that the USB to
Com converters find the right TBolt.
It is probably something very obvious that I am missing,
cheers,
Neville Michie
Right-click on your shortcut icon and edit the Target line to contain
whatever options you want to associate with that shortcut.
Oddly enough, I seem to have commented out the property dialog
example on
http://www.ke5fx.com/heather/readme.htm for some reason... it's
back now,
just below the main screenshot (click to enlarge).
-- john
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/
time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
