OK. I am now in my shop and I have the items in my hand. I got the replacements from Allied. They are marked '141 degrees C D139ZPXL'. I think they were NTE. They are 4 mm dia., 13 mm long, and the leads are 1 mm dia.
The HP/Agilent parts are marked 'UMI 1A 250V 115 degrees C'. They are 2 mm dia., about 9.5 mm long, and the leads are 0.52 mm dia. Therefore, the lead diameter would appear to be the rate limiting step in this approach. Joe -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Dan Rae Sent: Wednesday, November 02, 2011 6:40 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] 10811 thermal fuses Joe, I had forgotten that it is a tight squeeze in there, so yes, they may be too big to fit easily! Dan On 11/2/2011 2:59 PM, J. L. Trantham wrote: > These look like the ones I got from Mouser or whom ever. They look > different from what I got from Agilent. The ones from Agilent are smaller, > about the size of a 1/4 watt resistor, short leads, pre-bent, to allow them > to 'plug' into the PC board of the 10811. Cutting the leads and > 'pre-bending' probably explain the higher price from Agilent. Or it could > be the computerized tracking expense. > > Joe > > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com]On > Behalf Of Dan Rae > Sent: Wednesday, November 02, 2011 4:30 PM > To: 'Discussion of precise time and frequency measurement' > Subject: [time-nuts] 10811 thermal fuses > > While looking for something else I stumbled on an eBay seller in Hong > Kong offering five 113°C thermal fuses for $6 including shipping, which > seems like a reasonable deal... > > Item number:130579771801 > > Usual disclaimers apply, and before anyone complains, yes, it's a > generic photo. > > Dan > > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.