Hi We used to have a *lot* of stuff running on IOTech's. They are indeed good boxes.
Bob -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Mike S Sent: Monday, November 14, 2011 12:28 PM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] PicPlot GPIB to RS-232 At 09:00 PM 11/13/2011, Bob Smither wrote... >Does anyone have experience with this GPIB to RS-232 converter: > > http://www.webalice.it/hotwater/PicPlot.htm Watch ebay for IOTech Micro488/(A, or EX) controllers. I got a couple for $20-30 each. Only issue was the battery in the DS1216 was used up, so I had to do a reset each time I powered them up. I've since modified them to use a couple of CR1232 cells, and they work fine. The documentation can be found here: ftp://ftp.measurementcomputing.com/Manuals/Micro488EX%20Users%20Manual.pdf They're pretty straight forward to use. I'm pretty sure the Black Box controllers mentioned here ( http://www.ko4bb.com/Test_Equipment/GPIB.php ), are just relabeled IOTechs. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
