I've used "Reflectix" duct insulation in applications like this. it's essentially bubble wrap with a reflective layer, you can layer it pretty easily to add/subtract from the insulation value. plus is comes in small, cheap rolls
here is a link to the amazon item, but it's in most hardware stores too: http://www.amazon.com/Reflectix-6X25-Foil-Insulation-Lpw0602506/dp/B000BQNYSI/ref=sr_1_5?s=hi&ie=UTF8&qid=1325879277&sr=1-5 -Eric On Fri, Jan 6, 2012 at 11:39 AM, John Ackermann N8UR <j...@febo.com> wrote: > > I am looking for a readily available (from Home Depot or other local source) > insulating material to use in a chassis that's housing a sensitive OCXO. My > goal is just to slow down any external thermal transients so the oven loop > has time to react gracefully. > > I'm thinking of something in sheet form that I could glue to the inside > bottom and side of the metal chassis. The trimmed sheet sizes will each > probably end up being around 4 x 8 inches. I have enough clearance for a > thickness of a half inch or so. I'd like to avoid a bat material as that > would be hard to mount neatly. > > Long lifetime (ie, not getting all crumbly after a few years) is important as > I don't expect this oscillator to get cold until I do. > > Any suggestions of a material to look for? > > Thanks, > > John > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. -- --Eric _________________________________________ Eric Garner _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.