Hi A double oven should be one oven inside another oven. To count as an oven, you need a surface to heat, heaters, a temp sensor, and a controller. Insulation also comes in handy. You can indeed to multi zone heaters, but that's not the way a double oven works.
The enclosure in the MV89 pictures should be the outer oven. Inside that there likely is another set of heaters and past that the crystal. The enclosure appears to be soldered shut. Further investigation is likely to trash the unit. Of course if somebody has one they hooked up backwards on the supply... Bob -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Azelio Boriani Sent: Monday, February 13, 2012 4:51 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Morion MV89A pics I have always thought the space inside the cover was the outer oven... now I realize this is not quite correct but then the MV201, specified as a double-oven, can't be a double-oven. The MV201 has the crystal under a sort of Stonenge-like open structure: if this structure is the inner oven then the outer oven must be the cover. If the cover is the cover then this structure is the only oven and the MV201 can't be a double oven OCXO... I have an MV201 open right now: can take pictures. On Mon, Feb 13, 2012 at 2:28 AM, Tom Knox <[email protected]> wrote: > > Hi Gang; > You most likely have this link to Morion with data sheets on all their > oscillators, but if you don't: > http://www.morion.com.ru/eng/oscillators/ocxo/ > > Best Wishes; > Thomas Knox > > > > > Date: Sun, 12 Feb 2012 19:11:11 -0600 > > To: [email protected] > > From: [email protected] > > Subject: Re: [time-nuts] Morion MV89A pics > > > > At 05:45 PM 2/12/2012, Sam wrote: > > >Thanks for the pictures Scott, it was interesting to see under the > > >shell of these. > > >I wasn't expecting the inside to look so "hand made". > > > > Yep. Some of the surface mount components appear to be hand > > soldered. I was a little surprised that there was no mechanical > > frequency trim. Wonder if it's an AT or SC cut rock--anyone know? > > > > -- > > newell N5TNL > > > > > > _______________________________________________ > > time-nuts mailing list -- [email protected] > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- [email protected] > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
