Amazing teamwork and effort. Thanks for your hard work. Regards Paul On Thu, Feb 23, 2012 at 8:02 PM, Elio Corbolante <elio...@gmail.com> wrote:
> Thanks to Ignacio (EB4APL) and the generosity of Mike Harrison, today I > received a PCB of a disassembled FE5680A. > I provided to make some scans of the board at 2400DPI resolution: the > picture size is about 7700x11500 pixel (9MB) > > Top face (with and without ICs): > <http://www.rhodiatoce.com/pics/time-nuts/FE-5680A/FE-5680A_Top001.jpg> > < > http://www.rhodiatoce.com/pics/time-nuts/FE-5680A/FE-5680A_Top001_noIC.jpg > > > > Bottom face (with and without ICs): > <http://www.rhodiatoce.com/pics/time-nuts/FE-5680A/FE-5680A_Bottom001.jpg> > < > > http://www.rhodiatoce.com/pics/time-nuts/FE-5680A/FE-5680A_Bottom001_noIC.jpg > > > > Being able to remove the ICs, I was able to correct some flaws in the > previous schematics: > < > > http://www.rhodiatoce.com/pics/time-nuts/FE-5680A/FE-5680A_schematics_v0.2.pdf > > > > During the next week I will continue to write down the logical part of the > circuit and I hope will be able to dump the 8032 firmware > > _ Elio. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
