I have two 5370A and both run about the same temperature. It is high, but the heatink only supports a few power bipolar transistors used in the power supply that are designed to run hot.
Other than the inconvenience of having blisters if you touch the heatsink, I would not worry about it. Its better to have the heat dissipated outside the unit than inside. Didier KO4BB Sent from my BlackBerry Wireless thingy while I do other things... -----Original Message----- From: Eric Garner <garn...@gmail.com> Sender: time-nuts-boun...@febo.com Date: Fri, 9 Mar 2012 10:08:56 To: Discussion of precise time and frequency measurement<time-nuts@febo.com> Reply-To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Subject: [time-nuts] 5370B heatsink temperature I just acquired my first HP 5370B off of ebay. After I had it running for 30 min to get it warm and start doing the checkout procedures in the manual i noticed that the heatsink was REALLY hot. I used my IR thermometer to check it and it read ~160F(71C). This seems excessively hot to me. What's "normal"? i didn't see it in the manual, but I might have missed it. -- --Eric _________________________________________ Eric Garner _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.