psk fixer-uppers not working all that well. Back to the drawing boards as they say. But at least I can see whats up.
On Sat, Apr 14, 2012 at 9:51 PM, paul swed <paulsw...@gmail.com> wrote: > East coast here > Yes I ran into the same thing so missed getting the spectracom 8170 > sync'ed. Doesn't matter really, I now see whats up. > The HP 117 and the fluke 207 all lost lock and phase all over as expected. > Just jimmied in the homebrew psk fixer'upper (Another time-nut is helping > also.) to see if the fluke 207 will lock. > I can see I have an issue with the hysteresis, but knew that going in. > The 207 does lock but the above issue is not helping at all. > > Very curious I was copying a signal when wwvb was off, must have been MSF. > It was pretty darn weak at -85db. > Regards > Paul > WB8TSL > > > On Sat, Apr 14, 2012 at 9:40 PM, John Seamons <j...@jks.com> wrote: > >> On Apr 14, 2012, at 7:05 PM, Jim Hickstein wrote: >> >> > Did they start early? Both my Spectracom 8164 and 8170 are unlocked. >> I was expecting this, but not before 0130Z. >> >> The transmitter went off-air starting at 0100Z. Back on now at 0130 >> presumably with PSK. I'm recording, but haven't done any decoding yet. I'm >> hoping this test is more than just the static data pattern from last time. >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.