In my opinion nothing has to be changed. It is working OK this way. To improve performance it is worth to use linear regulators for the power supply +12V and -12V that are related to the OCXO supply and EFC.
On Wed, May 2, 2012 at 9:24 AM, francesco messineo < francesco.messi...@gmail.com> wrote: > On 5/2/12, Dennis Ferguson <dennis.c.fergu...@gmail.com> wrote: > > > > On 2 May, 2012, at 04:30 , Tom Van Baak wrote: > > > >> The UTC offset is in words 6-10, page 18, subframe 4 -- every 12.5 > >> minutes. > >> /tvb > > > > The leap second warning is also in the same place. How the unit could > > know that a leap second is pending but not know the UTC offset is a > > mystery. > > that's why I asked in the first place... all was "green" but the leap > second pending which I'd expected to be there anyway. The UTC offset > came much time later anyway. I don't know if the tbolt could be > "confused" or had some firmware issue after being unpowered for some > months. > > By the way, attached is a plot of signal levels with the new antenna, > I'm interested in opinions about what can be changed in the settings > to maybe improve performance. > Thanks > > Frank IZ8DWF > > > > Dennis Ferguson > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.