Paul, On 05/04/2012 09:11 PM, Paul swed wrote:
Magnus I finally get to help you after several years.
:)
Any antenna will do. But it must draw a certain amount of current. I use a 430 ohm 1/2 watt resistor to insure that the 700 knows it has an antenna. There is a antenna simulator in the manual.
I saw that. It came with full manual.
By the way I feed that and numbers of other loran C rcvrs from a home brew active splitter so I have to have the resistor on that feed. The 700 has a great deal of sensitivity so it offers lots of flexibility.
I've considered building an input amplifier similar to what is page 14/14 of the schematics sheets. It has a 3 pole Bessel filter, alongside a JFET amplifier.
If you have the $ buy a new one. But pretty sure you can't buy them anymore from SRS.
They are listed in their web-shop. Oh, I also have option 01, so I have a nice SC10 OCXO in there. :) I'll see what a resistor and a patch-cable for fake antenna does to it. Cheers, Magnus _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
