Hi A parametric (varicap based) divider might be an alternative. There's a lot of design information on them out there. They are pretty easy to build and reasonably robust.
Bob -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of J. Forster Sent: Thursday, June 14, 2012 8:37 AM To: time-nuts@febo.com; gen...@yahoogroups.com Subject: [time-nuts] Miller Divider Hi, Has anybody had any experience with the Miller frequency divider: input ------>- mixer ->-----o----->- output F | | F/2 ^ | |--- LPF --| There are more details in Wiki: http://en.wikipedia.org/wiki/Frequency_divider There were similar dividers used in the GR Synthesizers in the mid-1960s. My current interest is only in the divide-by-two. Thanks, -J ================= _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.