OK, I'll take a look at my cheap audio cards searching for the oscillator. On Fri, Jul 6, 2012 at 5:59 PM, Bill Dailey <docdai...@gmail.com> wrote:
> > Removed the oscillator and send it the required freq (24.576MHz) that is > disciplined to 10MHz. Put an sma connector next to the card in the little > cover on the pci slot. Currently using my ds345 but am getting a Valon > Synthesizer board with a divider. Tried ve1alq but the dividers aren't > right and can't seem to fix that. Have a vcxo but no way to discipline it. > Just going to break down and go the Valon route. Will also use it for > 125MHz for my qs1r. > > Have done this setup with 2 sound cards. One is a SB xfi surround USB and > the other is fata1ity extreme gamer. Works like a charm for both. 20uHz > plus minus through my radio (with 10MHz signal) Should be much better with > audio but can test because my ds345 is tied up. I would bet I will have > substantially sub-uHz precision is the audio only domain. > > Doc > KX0O > > > Sent from my iPhone > > On Jul 6, 2012, at 9:43 AM, Stewart Bryant <stew...@g3ysx.org.uk> wrote: > > > ... and running it to a sound card (oscillator gps disciplined) > > > > How did you achieve this? > > > > Thanks > > > > Stewart > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.