I think the HP 5087 Distribution Amp has a card that will do divide-by-ten.
-John ================== > Unfortunately, the TAPR T2-Mini divider > (http://www.tapr.org/kits_t2-mini.html) can't quite get to 1 MHz from 10 > MHz with the PIC divider chip due to limitations in the chip architecture. > > However, nothing says you couldn't "dead bug" in a decade divider chip > in place of the PIC, and let the T2-Mini provide the input conditioning, > output driver, voltage regulation, connectorization, etc. for you, > making it much a smaller project. > > John > ---- > > On 7/24/2012 8:18 AM, Chris Wilson wrote: >> >> >> 24/07/2012 13:14 >> >> My Racal Dana 9908 can take a 1 Mhz external reference. Inputting my >> Thunderbolt at 10 MHz works, but shifts the decimal point over. I am >> not sure if this has any other detrimental effects as to accuracy or >> other? What's the easiest way to have a 1 MHz reference from the >> Thunderbolt for this timer / counter please, yet retaining 10 Mhz for >> my other devices that want a 10MHz reference signal? Thanks. >> > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.