Azelio Boriani <azelio.boriani@...> writes: > > What 'scope are you using (brand and model)? TLL is 5V, CMOS 4000 series > can be 15V but runs starting at 3V. Set the scope vertical (channel 1) at > 1V/div (probe at 10:1), use NORMAL for the trigger and set the trigger (for > the channel 1) *slowly* from 0V to +200mV (assuming that the trigger isn't > aware of the 10:1) trying to follow the trigger indicator or the trace > appearing on the screen. > > On Fri, Aug 3, 2012 at 3:31 PM, <bg@...> wrote: >
Azelio, I tried my two HAMEG Scopes for this job, a digital variant HMO3524 and my analog HM2005-2 scope... I am quite familiar with scope measurements :-) so there are definitely no PPS signals on the output... Chris _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.