I have found this: http://home.earthlink.net/~davesullins/software/dis51.html
not tested, but it seems good On Thu, Nov 8, 2012 at 3:12 PM, paul swed <paulsw...@gmail.com> wrote: > I have no idea on a free disassembler. But there has to be one. Will look > later tonight. > Regards > Paul. > > On Thu, Nov 8, 2012 at 8:44 AM, Elio C <elio...@gmail.com> wrote: > > > From: paul swed <paulswedb@...> > > > > > Just downloaded the information. The schematic really is shaping up > very > > > nicely. > > > On the dumps any suggestion for looking at them? > > > > > > > You have to use an 8051 disassembler to look at the FLASH dump: I have > > been using IDA <http://www.hex-rays.com/products/ida/index.shtml> > because > > a > > friend of mine is a licensed user (this package is rather expensive!). > > Unfortunately I must go to his office to use the program, so I'll have to > > find a cheap (freeware?) alternative to disassemble 8051 code. > > Any suggestion? > > > > _ Elio Corbolante. > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.