most interested in you progress. What will be the total power consumption of the pi and gps rcvr?
On Fri, Nov 9, 2012 at 3:17 AM, David J Taylor < david-tay...@blueyonder.co.uk> wrote: > Thanks to the folk here for pointing out the ublox receivers. I managed > to get one off eBay for ~US $30 with antenna on a board designed for > hobbyists with 3.3V serial and PPS outputs (I needed to add one wire for > that) which feed directly into a Raspberry Pi. It's still to be completed, > but the serial 9600 baud and PPS outputs appear to be spot on. My early > notes are here: > > > http://www.satsignal.eu/ntp/**Raspberry-Pi-NTP.html#serial<http://www.satsignal.eu/ntp/Raspberry-Pi-NTP.html#serial> > > I'm intending to use a second Raspberry Pi with the ublox NEO-6M, but I > don't expect to see any significant difference (at the microsecond level) > between it and the Trimble module I'm already using. > > Cheers, > David > -- > SatSignal Software - Quality software written to your requirements > Web: http://www.satsignal.eu > Email: david-tay...@blueyonder.co.uk > > ______________________________**_________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/** > mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.