Adrian, Take a look at Patent # US 6226231 B1 for a schematic of the interpolator used in the Wavecrest DTS-2075. It may be similar to what you are trying to troubleshoot and might give you some ideas.
Richard > In the meantime I heard that Wavecrest is not distributing service > manuals. All repair is depot.repair. > > This makes me considering if I should take the chance on a second unit, > hoping to get one working out of two, or simply to give up and accept > that these boxes are only intended to be used as door stops of land fill > once defective... I've never been confronted with such a poor customer > sevice attitude before. > > Nevertheless... is there anyone who has acquired some experience with > the DTS-series innards who would be willing to share his knowledge? > > Adrian > > > Adrian schrieb: >> Anyone have a Wavecrest DTS 2075/77/79 service manual? >> >> I've recently got a DTS 2077 that however turned out to be defective. >> There was a power supply failure that I could fix, but there is still >> a power-up selftest error message and calibratin fails. >> >> Adrian >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. >> > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.