Hi Said, Look at Dieder's site.
Groet, Henk Op 20 nov. 2012 om 02:36 heeft saidj...@aol.com het volgende geschreven: > There is one calibration that can only be started by a GPIB command. I ran > into that, my unit constantly said something like "xxx calibration > required" or similar during power on. No way to do it with the front panel > buttons. > > It is easy to start that cal using Visi, or via sending a GPIB command if > I remember correctly. Unfortunately I lost my Visi CD.. > > bye, > Said > > > In a message dated 11/19/2012 01:47:55 Pacific Standard Time, > h...@deriesp.demon.nl writes: > > Hi, > > The Wavecrest DTS 207X has a number of proms and also battery back-up > devices. I think it will be wise to check these first. > Or are you sure that it is hardware? How old is your DTS? > > Henk > > > >> In the meantime I heard that Wavecrest is not distributing service >> manuals. All repair is depot.repair. >> >> This makes me considering if I should take the chance on a second unit, >> hoping to get one working out of two, or simply to give up and accept >> that these boxes are only intended to be used as door stops of land fill >> once defective... I've never been confronted with such a poor customer >> sevice attitude before. >> >> Nevertheless... is there anyone who has acquired some experience with >> the DTS-series innards who would be willing to share his knowledge? >> >> Adrian >> >> >> Adrian schrieb: >>> Anyone have a Wavecrest DTS 2075/77/79 service manual? >>> >>> I've recently got a DTS 2077 that however turned out to be defective. >>> There was a power supply failure that I could fix, but there is still >>> a power-up selftest error message and calibratin fails. >>> >>> Adrian >>> >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >> >> >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.