You do not want to depend on an instrument that will switch its reference willy nilly while you take measurements.
Have a switch so that you have some control on what is happening. Sometimes too much automation is just complication without justification. Didier KO4BB Sent from my Droid Razr 4G LTE wireless tracker. -----Original Message----- From: Joseph Gray <jg...@zianet.com> To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Sun, 09 Dec 2012 3:13 PM Subject: [time-nuts] Switching oscillators I have a device that has an internal TCXO. I want to feed it with an external OCXO, but I don't want to completely replace the TCXO. Here is the scenario. On initial power on, or after a power loss, I want the internal TCXO to be used. Once the OCXO is up, I want to switch to it. How could this be done easily and cheaply? Joe Gray W5JG _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.