Hello Time-nuts, Happy New Year,
I am having a problem with my SR620. I am using the RS232 interface to configure and read the results. I am using my own code, and I am continually make revisions, updates, (Spelled: E-R-R-O-R) to my code. Every couple days I manage to scramble the brains of the SR620. When this occurs the output doesn't make much sense, so I know I did it again. Darn, I hate when that happens! The symptom is that the command input doesn't return an answer as expected. I must enter between 5,6 to 35 or more <cr>, <lf>, characters to get the expected result. Once in this condition it's always the same amount of <returns>. I have tried various of the documented commands like *RST, and several others. Nothing works except the dreaded [POWER OFF] button. Is there a secret sequence or magic three finger button combination? I have not tried any of the serious calibration, or diagnostic commands. My firmware is 1.48. Thanks, Ed WA6RZW sent from martel _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
