Suspicious of a power supply issue. Good luck.
Joe -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Joseph Gray Sent: Saturday, January 12, 2013 11:14 PM To: Discussion of precise time and frequency measurement Subject: [time-nuts] Z3801A trouble After many years of faithful service, my Z3801A has stopped working. It seems to be going through a loop at powerup. All of the LEDs blink at once, then they blink in order, left to right. After several seconds, this is repeated. I'll have to clear the bench of the project I was working on so I can take the Z3801A apart. Joe Gray W5JG _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.