Perhaps consider eBay item # 270970034317 ? JimT
On Thu, Feb 14, 2013 at 8:36 AM, Bob Camp <li...@rtty.us> wrote: > Hi > > For a bench reference, the TBolt, the 3801, the 3805, and the 381x's are all > pretty much equal. The 3801 is getting a bit old (and expensive). You > probably can find one of the newer parts easier and for less money. The only > odd thing you will run into are the sub-versions that don't have a 10 MHz > output. Obviously they aren't quite as useful. > > Bob > > -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On > Behalf Of Greg Broburg > Sent: Thursday, February 14, 2013 9:14 AM > To: time-nuts@febo.com > Subject: Re: [time-nuts] Looking for Z3801 > > Hello > > I am looking for a working Z3801 for a shop bench reference. > > Located in Minneapolis. > > I see that there is essentially nothing on eBay. > > Considering T-Bolt or Z3805 also. > > Greg > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.