Finally broke down and built a crossover Ethernet cable Manually
setting my laptop to 192.168.56.100, I can connect to the TS2100L on
192.168.56.99
I was able to telnet to the TS2100 L and clear out the stray bits in the
config that were not allowing me to config via the serial port.
Appreciate the help from everyone!
Martin Flynn
On 2/23/2013 12:15 AM, Scott McGrath wrote:
Ill see if I can dig up my manual for this used these units a few years ago
Sent from my iPhone
On Feb 22, 2013, at 9:10 PM, Martin A Flynn <mafl...@theflynn.org> wrote:
Scott,
Can you point me at the appropriate documentation so I can default the unit?
Martin
On 2/22/2013 1:06 PM, Scott McGrath wrote:
Recommend doing a reset to default and configure as directed there are a lot of
configurable options which can control access to this box
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
