As far as I can tell by looking at the release notes and the settings in Timelab itself, none of the Racal-Dana counters are directly supported which is unfortunate because my best counter is a 1992 that I rebuilt.
Timelab and the Racal-Dana 1991/1992 both support talk only mode though so maybe that will work. Check page 4-20 of the Racal-Dana manual. On Mon, 25 Feb 2013 17:24:22 +0100, Adrian <rfn...@arcor.de> wrote: >John's fine TimeLab of course! >http://www.ke5fx.com/timelab/readme.htm >Just don't ask me which Racal counter is or isn't supported. > >Adrian > >Dan Rae schrieb: >> I am working on 400 - 500 MHz DDS clocks for an amateur radio project >> and would like to record over gpib and plot the relative frequency >> drifts over time of different versions of the oscillator from a cold >> start. I have Racal 1992 and -hp- 5345 counters available, themselves >> driven from gps. I have the prologix USB thingy. >> >> Does anyone know of any software that will enable me to do this, >> without spending lots of money? >> >> Dan _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.