Hi Iban do you have a manual? they are available. From memory because its a
while since I worked on my Wavetek- Rockland unit I believe the remote
programming is in parallel with the front panel switches. The reason for
raising this is that there may be a problem on the back of the panel
switches.....mabe a wire off. Does the 800Mhz front panel switch setting
work correctly ??
Alan
G3NYK
----- Original Message -----
From: "Iban Cardona" <icard...@gmail.com>
To: <time-nuts@febo.com>
Sent: Friday, March 01, 2013 6:42 PM
Subject: [time-nuts] PTS 3200 remote programming
Hi,
I'm traying to use to program the bcd interface of a PTS 3200.
My truble us tha the 100Mhz decade 8 value bit is ignored by the PTS,
then if I send 800Mhz to the PTS dont get output, and if send 900Mhz
then I get 100Mhz.
I checked the unit and the hardware looks OK. And my code is working
well in another PTS units like the 620.
The 3200 have some trick?
Thanks for all
73! Iban
eb3frn
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
