Hi Tom,
I see my 'Reader' has different options. It's a leaper 3C from Taiwan. You can download the software here: http://www.vk2hmc.net/blog/?wpfb_dl=6 and run it in the demo mode. I guess you could even load the ROM images I took and save them in different format. Under parameters, there are a number of options selectable for data set. 8 Bit, 16 bit (even and odd) and 32bit (1st, 2nd, 3rd, 4th) I was using 8 bit. Perhaps I should have been using one of the other options? mark -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Tom Van Baak Sent: Thursday, 18 April 2013 2:21 AM To: time-nuts@febo.com Subject: Re: [time-nuts] Z3805A flash dump. I suspect your reader is not configured correctly. For example, look at the first 80 bytes of each BIN file; they should not be so identical. After you fix that, then combining low/high bytes will give you what you want. See http://leapsecond.com/museum/z3801a/eeprom.htm for an example of the result. /tvb ----- Original Message ----- From: "Mark C. Stephens" <ma...@non-stop.com.au> To: <time-nuts@febo.com> Sent: Wednesday, April 17, 2013 1:31 AM Subject: [time-nuts] Z3805A flash dump. >I have dumped the 4 flash ROMS from my latest Z3805A but I can't make head nor >tail of the contents. I am thinking the flash are interleaved. > > http://www.vk2hmc.net/blog/wp-content/uploads/2013/04/z3805-flash.rar > > I can't see any strings that make sense like the Z3801A flash. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
