Hi Ummmm, errrr. Even with all the mods, a 4501 is a fairly low resolution device. It's an amazing little box and I have several of them. Some (but not all) with the mods actually done correctly.
You should be able to get away with a lot when driving one. Fancy distribution "stuff" is not needed in this application. Solid reliable connections yes, but not super low phase noise or 1x10^-15 / 1 sec additive ADEV. Bob On Apr 22, 2013, at 7:38 PM, Kevin Rosenberg <ke...@rosenberg.net> wrote: > I hope all is going well with your next-generation TADD-1. I'm thinking just > thinking about putting > a T-bolt disciplining a PRS-10 discipling a Soekris 4501. I was thinking a > TADD-1 one would be nice for driving 10 MHz line to another room with the > TADD-1 also providing galvanic isolation. > > If you need help testing, I have a TimePod along with some 10811s and PRS-10s > for testing. Though, I know that you have more stable sources than I and I've > appreciated looking at your published phase noise plots of the years. > > Kevin > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
