Hi Chris, I ordered a similar one today, along with a 10ft Male-Male serial cable. I'm looking forward to getting the hardware finished. I put a ZIF on the VE2ZAZ board, so next I'll probably be playing with the software. Someone on the list talked about FLL vs PLL with this card, so I'll examine that for awhile. I have a few ideas I'd like to try out that probably only apply to the OCXO I'm using.
Bob >________________________________ > From: Chris Albertson <albertson.ch...@gmail.com> >To: Bob Stewart <b...@evoria.net>; Discussion of precise time and frequency >measurement <time-nuts@febo.com> >Sent: Friday, July 12, 2013 7:27 PM >Subject: Re: [time-nuts] GPDSO is working > > > > > > > >I have a UT+ I bought a TTL-RS232 converter on eBay the converter is built >into a DB-9 socket. It uses male header pins for conniption, the same kind >of pins as on the UT+ >Look at item # 330838910970 on eBay. It is almost exactly what I have, lots >of people sell them. It is just the max232 chip but the packaging looks >clean and easy to use. > > >But as I remember I had to use at least one inverter gate. I forgot why maybe >to drive the PPS or the LED I wanted to add. > > >I don't have a VE2ZAZ board. I was using the UT+ for NTP server. My next >project is to build a GPSDRO (GPS Disciplined Rubidium Oscillator) I could >likely count the 10MHz output for 10,000 seconds. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
