A reference to GR and Rubidium http://www.ieee-uffc.org/frequency-control/memoria-stratemeyer.asp
Did the GR 1115A, Sounds like an interesting person. On Sat, Jul 27, 2013 at 6:24 PM, Pete Lancashire <p...@petelancashire.com>wrote: > > https://plus.google.com/u/0/photos/111617808980322733757/albums/5890266601277045697 > > The board with the edge connector was inside the same bag the > connector was in, the bag was taped to the unit. > > I pulled the ends off first, but was immediately stopped with foam, it is > glued in place. > Then when I finally got the lid with all the screws off, all there is, is > one board covered in potting compound. > > The compound breaks away pretty easily. One can see where a couple parts > were > replaced and there soft RTV was used. There are two precision resistors in > that area. > > The biggest surprise is the General Radio logo on the board ! > > goo.gl/1XGG2F > > > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.