On 08/21/2013 06:46 AM, Ed Palmer wrote: > Does anyone know if this situation would benefit from doing something > similar to a 'Collins Hard Limiter' i.e. instead of squaring the > signal in one stage, use maybe two or three cascaded stages with > increasing bandwidths? Normally, Collins limiters are used with beat > frequencies of less than 1 KHz, but maybe there's value in doing at > typical time-nuts frequencies. > > Any thoughts? The input stage of the TADD-2 is a good example, with direct inspiration from Wenzel it amplifies the signal up. I then use the result to drive a spare output and there I get much less jitter than the sine 5 MHz alone.
So, the application is low-jitter signal. Cheers, Magnus _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.