For serial to Ethernet I use ser2net [1] on cheap wireless routers using the serial port pads on the board and a Beaglebone. The application I use (u-blox u-center) can use TCP connections, if you require a real COM port on Windows com0com and com2tcp [2] should work.
ser2net sends one TCP packet per character received on the serial port, this may be desirable (when you need the lowest latency) or not (when you want to reduce packet overhead) [1] http://ser2net.sourceforge.net/ [2] http://com0com.sourceforge.net/ On Sun, Jan 27, 2013 at 9:47 PM, Stan, W1LE <stanw...@verizon.net> wrote: > Hello The Net: > > Yes, I have had the mouse problem, but the more serious issue is when I run > multiple (3) instances of Lady Heather > (latest version at KE5FX) and after awhile none of the times agree and the > problem only gets worse with time. > I have tried the multiple USB to RS232 adapters into motherboard USB ports > and I have tried a multi USB port PCI card. > > Any solutions with this problem ? > > Stan, W1LE Cape Cod FN41sr > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.