Bob,
Does your Rb send the serial out on the DB-9, or did you solder in a connection? I'm looking at mine and it looks like pin 8 is connected to something and pin 9 seems to come in to an empty SMT slot for a cap or resistor. I was thinking of bringing a ribbon cable out between the covers above the DB-9, but maybe I should just take over 2 pins on the DB-9? Any ideas what the pins 8 and 9 would have been hooked up to if they don't go to the serial input? Bob >________________________________ > From: Bob Camp <li...@rtty.us> >To: Discussion of precise time and frequency measurement <time-nuts@febo.com> >Sent: Wednesday, September 18, 2013 7:25 PM >Subject: Re: [time-nuts] GPSDO vs Rb standard > > >Hi > >When I want to tune an Rb, I just hook up to it with a terminal program and >hack away at it. There's not a lot to the protocol. > >Bob > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
