If anyone has a service manual I am also very interested. Thanks Thomas Knox
> From: tmil...@skylinenet.net > To: time-nuts@febo.com > Date: Wed, 2 Oct 2013 13:22:45 -0400 > Subject: Re: [time-nuts] FTS 4060 Cesium Time & Frequency Standard, Datum > > Hello Corby, > > Thanks for the help. Yes, could you copy me on the information for the U1 > chip? I do not have anything other than the user manual from Brooke. At this > time, anything will be a great help. > > > Best regards, > Tom > > > ----- Original Message ----- > From: <cdel...@juno.com> > To: <time-nuts@febo.com> > Sent: Wednesday, October 02, 2013 11:47 AM > Subject: [time-nuts] FTS 4060 Cesium Time & Frequency Standard, Datum > > > Tom, > > On the 4060 you can easily monitor the Ion pump voltage and current, the > electron multiplier voltage, and other important parameters by measuring > the voltages on the U1 chip on the uP board. > This saves you fronm having to diconnect stuff to measure the HV and > such. > If you don't have a manual showing the pins of U1 I can post to pinout > here on Time Nuts. > > Corby > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
