Hi John Just as a quick follow up, I'm still intrigued as to why I've been seemingly unable to get the CNT91/FCA3100 to run in talk-only mode and might well come back to that when I have a bit more time but, from a TimeLab point of view, with the HP emulation up and running would there actually be anything to be gained by doing so? Regards Nigel GM8PZR In a message dated 10/10/2013 07:45:00 GMT Daylight Time, j...@miles.io writes:
> -----Original Message----- > From: time-nuts-boun...@febo.com [mailto:time-nuts- > boun...@febo.com] On Behalf Of gandal...@aol.com > Sent: Wednesday, October 09, 2013 5:28 PM > To: time-nuts@febo.com > Subject: Re: [time-nuts] Pendulum CNT91 with TimeLab > > Considering that I now know there is data coming through I'm wondering if > I'm still misinterpreting that error message. > I was assuming that the ID string was what TimeLab was claiming to be an > invalid frequency but it occurs to me that it might also mean "I'm getting > invalid frequency data and this is where it's coming from..." That's probably what's happening. If the returned string doesn't contain "Hewlett", it will assume it's a valid sample value and try to evaluate it. Can you try unzipping these replacement .TLL files into the "drivers" folder beneath your TimeLab installation directory? http://www.ke5fx.com/tic_drivers.zip After you do that, there should be a checkbox in the acquisition dialog that you can uncheck to keep it from trying to automatically identify the counter model. Let me know if that helps. -- john, KE5FX Miles Design LLC _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
