David and Chris, Thanks for the comments.
While my interest does include use as NTP server it is not entirely limited to that application, for example data collection and possibly RTL-SDR based ADS-B. I have spent much time searching for information on both devices and as David suggested, the Beaglebone Black has a bit more going for it technically but the raspberry PI has a much larger user base. I am considering one or the other or perhaps both to supplement my use of Arduino's and in light of the fairly recent announcement of the newest member of the Arduino stable in partnership with Intel I am wondering whether to wait for the new Aruduino offering (more $ but not much) or whether the PI or Beaglebone will do. See here for info on the Arduino Intel Galileo http://arduino.cc/en/ArduinoCertified/IntelGalileo Speaking of Arduino, I have still not posted my sketch for my very simple NTP client clock display. I should have known that when I dug out the code and started to clean it up a bit before posting that I would end up spending more time fussing over it. Soon. Cheers, Graham ve3gtc -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Chris Albertson Sent: October-22-13 11:36 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Making a Raspberry Pi NTP server without soldering On Tue, Oct 22, 2013 at 7:13 AM, Collins, Graham <coll...@navcanada.ca>wrote: > > > How you done anything with or have compared the PI to the Beaglebone Black? If your only use of the device is to have an NTP server then why pay more for the Beaglebone? The Pi based server seems to be better than required. "better" in this case meaning that it keeps time better then it can transfer it over your network. If you need a lower cost Linux server, you can repurpose a PogoPlug. These are roughly the same specs ARM process and a little bit of RAM but come with a case and power supply all for under $20. You can re-flash them with a general purpose Linix-ARM distribution. But no good place to attach a PPS input except for using a USB-Serial dongle. Well there is a serial port header inside the box but I've not tried it. Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.