Wouldn't an attenuator solve that?
On 11/8/2013 7:03 PM, Richard Karlquist wrote:
On 2013-11-08 15:49, gandal...@aol.com wrote:
At 1000 MHz, the highest frequency I can generate right now, I've measured
the channel 3 input sensitivity as -50dBm with a sinusoidal signal.
Regards
Nigel
GM8PZR
This high sensitivity is probably a bad thing, not a good thing.
It is indicative of a dynamic divider. For a frequency counter
prescaler, you want a static divider, such as the HP5386 used.
Dynamic dividers make errors if the signal being measured
has a broadband noise floor or sufficiently high spurs at any
frequency.
Rick Karlquist N6RK
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
