Basic resistor has three color codes - two significant digits and a multiplier - and then likely silver or (more commonly today) gold band. Silver is 10%, gold is 5%.
A high -spec resistor can have extra color bands to denote things like tempco, reliability, etc. and may have a non-silver and non-gold band for a different tolerance range. You might've been reading the resistor "backwards" without the gold band to help guide your eye, or confusing significant digit bands with multiplier bands. On Thu, Nov 21, 2013 at 1:11 PM, <brucekar...@aol.com> wrote: > While tracing out a PC board from an instrument manufactured in Germany, I > quickly discovered the color code on 1/4-watt composition resistors is not > the same as that commonly used in the US For example, I would measure > about 10,000-ohms across a presumably good resistor that appeared to be > marked > 2700-ohms. Has/does Germany used a different code for such parts? > > Bruce, KG6OJI > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
