Hi Dave, Well, the question is do you think that is good or bad for the sound card ?
Bill....WB6BNQ quartz55 wrote:
I've been testing my soundcard measurement capability with Speclab, so I hooked my LPRO Rb to lock my Moto Service Monitor, fed the 1K audio out into the sound card and I measured the freq over about a half hour. I got a spread of about 107uHz. I've tried a few other things through my TS2000 using a 1500Hz tone from the USB and I can see when the fan goes on and off although I have the RX main osc locked to the GPSDO with the XRef from VK3HZ. I can only assume the drifting in the RX is due to the DSP processing crystal drifting with temp. I get about 13mh drift on that. Anyhow, here's a shot of the 1000Hz directly into the soundcard with Speclab. http://i251.photobucket.com/albums/gg287/DogTi/time/1k30m_zpsc4173981.jpg I almost don't believe it, does anyone else? Dave N3DT _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
_______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
