Hi Tom, Actually, no-one has. And come to think of it, maybe that's the root of the problem. I have the resistors lying on their sides right under the OCXO on the opposite side (bottom) of the PC board. Any air circulation is going to make them weave and wobble a bit in value. I'll have to see if there's anything I can do about it quickly with a piece of foam. I'll for sure do something when the new parts come in. I may have to cut a hole in the PCB the OCXO is mounted on.
thanks! Bob >________________________________ > From: Tom Knox <act...@hotmail.com> >To: Time-Nuts <time-nuts@febo.com> >Sent: Friday, January 31, 2014 9:54 PM >Subject: Re: [time-nuts] EFC divider resistors > > >I am not sure if anyone else mentioned this, Placing the parts against the >oscillator with a little thermal epoxy under a small piece of foam so they are >at least partially "ovenized" should really help. > >Thomas Knox > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.