I've got some GPS-18x LVC units i'm using for a time reference, and
they're showing an odd behavior: the position isn't updating.
I moved them across the US (from Los Angeles to the east coast), and
when I powered them up here, it's returning the LA Lat/Lon (34N,118W),
the (reasonably correct) UTC time and date, but never getting a fix.
In theory, this should be like a cold start, and in 45 seconds, it
should reacquire the satellites it can see from scratch, but it's not.
I got one to start going by running the Garmin configuration program and
setting the current position (not all that accurately, within 1 degree
lat/lon), and it started running. The other doesn't seem to want to
come alive.
I'm assuming that it's just running the clock forward based on it's
internal low power clock/battery.
I haven't checked for the 1pps output (no scope here, for one thing..and
I'm not quite ready to write some software to probe the RS232 pins to
see if it's there.
Has anyone seen a similar behavior? I've tried the power cycling, and
the Garmin "reset" command. I've not done the "clear non-volatile
memory" which makes it forget the almanac.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
