I am not an expert but have used the 82350B with Labview on a regular basis with no problems. Have you installed the Agilent I/O Libraries.
Best Wishes; Thomas Knox > Date: Mon, 14 Apr 2014 08:21:08 -0700 > From: j...@quikus.com > To: time-nuts@febo.com > Subject: Re: [time-nuts] Software for use HP 82350B gpib card. > > FWIW, the HP GPIB cards are only really useful with a complete HP system > that runs HP special software in a complete computer controlled > instrument. > > If that is not your intent, get a NI or compatible card. It'll be far > easier in the long run. > > YMMV, > > -John > > =================== > > > > > Hi, > > > > I need any software to work with HP5335a or hp 5370B witch work with the > > 82350B gpib card. > > Timelab only works with national instruments IEEE488.2 compatible devices. > > Can anyone help? > > > > Rui Martins > > > > _______________________________________________ > > time-nuts mailing list -- time-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > and follow the instructions there. > > > > > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.