I have had great difficulty getting various MAX3232's to work reliably on 3 ..
3.6V. The datasheet shows the capacitor values you need to use for various
voltage ranges... but no joy. The DC-DC converter does not produce the proper
output voltages. Check the V- and V+ nodes for around +/- 6V
Oddly, MAX232A's seem to work just fine on 3.3V... I usually use 0.47 uF caps
on them. I don't use the non -A versions for the MAX232.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.