What accuracy requirements do you have. This could be easy or impossible. Don't spend to much money distributing 1PPS because you can have it any place you want for the cost of a GPS receiver. A second GPS receiver is likely cheaper than the cost of 120 meters of cable plus the cable drivers and receivers. Even if you build the cable system you'd need to test it which adds more time and cost. GPS is so cheap you can place them where needed.
On Sun, Jul 13, 2014 at 8:19 AM, Martin A Flynn <mafl...@theflynn.org> wrote: > I am working on a project where I need to transfer 1PPS approximately 120 > meters between buildings. I cam borrow a pair of 62.5 fibers from > IT/telco to do so. > > Playing cost / performance against one another, I am looking for a solution > somewhere in the middle that does not requires SM-28 single mode fiber) > > Martin > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. -- Chris Albertson Redondo Beach, California _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.