Hi Dan, I think you're looking for the "u-center" software. Finding software on that site can be difficult, so it's easier to resort to a websearch. There's a link to the latest software on this page.
http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html As to the antenna, google "diy gps choke ring" to get the fundamentals. Walmart sells a set of Wilton stackable aluminum pie pans that seem to be a pretty good fit for our needs. I've done a few experiments, but haven't set it up because I didn't find a suitable platform for the antenna puck to rest on and haven't wanted to spend the time to make something. Something made out of steel would be ideal for the magnetic mount of a puck antenna, if that's what you have. Bob ________________________________ From: Dan Kemppainen <d...@irtelemetrics.com> To: time-nuts@febo.com Sent: Monday, August 25, 2014 9:48 AM Subject: [time-nuts] LEA-6T Software. Hi All, Just purchased a LEA-6T based board to play with (It's a Synergy Systems SSR-6Tru). The Ublox web site has some documentation regarding the setup of these units. In the documentation are some screenshots of what appears to be a utility for configuration. I haven't seen it on the Ublox web site yet. Do any of you know what that software might be, and where one would get it? The unit is a few weeks out on delivery, so wanted to see what I could to to prepare for it's delivery. What other utilities and software are available what would pair with these units? FYI, I run windows based software. Also, I have a low cost antenna coming. It's one of the Synergy systems puck type amplified antennas. I remember some time back a bit of chatter about improving GPS antennas for timing, by providing some sort of guard ring or choke to prevent low angle reception. Are there any good links anyone could provide on what may be worth building or playing with. Keep in mind, I live in snow country (~300 inches/year) so a something that gathers a lot of snow could be undesirable! :) Thanks, Dan _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
