On Sun, 2 Nov 2014 12:13:34 +0300, you wrote:
>Mode has been switch from Frequency to TI - result is much better now. It was >the main improvement in my measurement. Thanks a lot! >Picture of ADEV OCXO result - >https://dl.dropboxusercontent.com/u/21338179/hamradio/OCXO_Adev/OCXO%20ADEV%20TI%20mode%2020141102.jpg Hi Karen, You appear just to be measuring the ADEV of your counter in single shot TI mode here, not the oscillators - how exactly do you have the counter and oscillators connected up? If I was doing it I'd probably try start by setting the counter to measure freq in Smart Freq mode, and set it to ext ref, with one morion feeding the external reference and another on the input. If the morions are ok you should get towards 1E-11 at 1 sec (if I'm reading the specs correctly) If not, try other oscillators and see if anything changes. As John said, TI is more complex to do anyway, and with quartz that has not had days or even weeks to settle it's a total pain. Angus _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.