I do a lot of work with SMD parts and would be happy to solder up and SOIC-16 version of the 74AC161, such as this one:
http://www.digikey.com/product-search/en?pv633=35&k=74AC161&mnonly=0&newproducts=0&ColumnSort=0&page=1&stock=1&quantity=0&ptm=0&fid=0&pageSize=25 onto a dip break out board, such as this one: https://www.adafruit.com/products/1207 Or, if you need something more complex, I do a lot of PCB design using OSH Park <https://www.oshpark.com> and I'd be happy to whip up a simple PCB for you. It takes a few weeks to turn around a board, but it's a very economical service ($5 a square inch for three copies.) Wayne On Fri, Nov 7, 2014 at 1:12 PM, Joseph Gray <jg...@zianet.com> wrote: > I need to divide a 125 Mhz clock by five. I have looked on Mouser and every > chip I find is either obsolete or in SMT. Can anyone recommend a chip that > is fast enough and comes in DIP? > > Joe Gray > W5JG > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.