Joe, This puppy can go to 166MHz over temp and has standard 100 mil pin spacing if you put it into a socket: ATF16V8C
I have not used PALs since 1992 but I used to be extremely fond of the 16R8 and 22V10 types back then. This is a 16V8 that will do your divider in no time: http://www.digikey.com/product-detail/en/ATF16V8C-5JX/ATF16V8C-5JX-ND/1027054 Best of all its available and only ~$3.. Said Sent From iPhone > On Nov 7, 2014, at 19:37, Joseph Gray <jg...@zianet.com> wrote: > > Looks like I can get the 74AC161 in DIP from Mouser. Thanks to everyone for > the suggestions. I still like DIP for prototyping on breadboards. > > Joe Gray > W5JG > > >> On Fri, Nov 7, 2014 at 4:45 PM, Alex Pummer <a...@pcscons.com> wrote: >> >> >> >> check if you could get a 74AC161, which could be connected to divide by 5 >> at 125 MHz see here http://ecee.colorado.edu/~mcleod/pdfs/IADE/references/ >> 74AC161.pdf to be sure to work at 125MHz run with 5,5 to 6V... >> >> 73 >> Alex >> >> >> >>> On 11/7/2014 1:12 PM, Joseph Gray wrote: >>> >>> I need to divide a 125 Mhz clock by five. I have looked on Mouser and >>> every >>> chip I find is either obsolete or in SMT. Can anyone recommend a chip that >>> is fast enough and comes in DIP? >>> >>> Joe Gray >>> W5JG >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com >>> To unsubscribe, go to https://www.febo.com/cgi-bin/ >>> mailman/listinfo/time-nuts >>> and follow the instructions there. >> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/ >> mailman/listinfo/time-nuts >> and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.