Hi I’ve posted a couple of phase plots of a few of the KS-24361 compared to a 5071A and to each other via a TimePod. Since phase is essentially time, it’s a good way to get an idea of what’s going on. Spot checks with a terminal program and SCPI appeared to show reasonable agreement between phase and what the status screen reported. I can probably come up with more data if the world has not gotten tired of looking at plots.
I suspect that for long term data, there is some sort of “simple” SCPI that just gets the time error. The full status screen is not very good for that kind of use. It takes more than a second to compile inside the box. Bob > On Nov 20, 2014, at 7:00 PM, Anthony Roby <ar...@antamy.com> wrote: > > Bob - what data are you capturing / measuring? I was thinking of just writing > a simple capture program from the unit and analyzing it in Excel. When you > say the status screen correspons to the data you've measured, what is it that > you are comparing? > > Anthony > > -----Original Message----- > From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of Bob Camp > Sent: Thursday, November 20, 2014 5:05 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] Lucent KS-24361 Ref1 burnin after 1.8 weeks > > Hi > > Based on what I ??ve seen on multiple boxes, I believe that the graph you > have been looking at for TI is messed up due to a software bug. Checking > things with a terminal program, the status screen corresponds pretty well to > the data I ??ve measured. > > Bob > >> On Nov 20, 2014, at 4:40 PM, paul swed <paulsw...@gmail.com> wrote: >> >> I have been snapping pix so can compare now. >> Getting better. >> Regards >> Paul >> >> On Thu, Nov 20, 2014 at 12:14 PM, Anthony Roby <ar...@antamy.com> wrote: >> >>> I'll fire up my lab PC and take a more recent screenshot of my data - >>> when I last looked the EFC was a straight line and PPS TI / s had >>> settled down but was still noisy. >>> >>> -----Original Message----- >>> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of paul >>> swed >>> Sent: Thursday, November 20, 2014 10:24 AM >>> To: Time-nuts >>> Subject: [time-nuts] Lucent KS-24361 Ref1 burnin after 1.8 weeks >>> >>> As suggested by Bob and others the REF1 new out of the box needs time >>> to burn in. At 1.8 weeks now I can see the EFC settling down towards >>> a straight line. To start I was about 800 counts per day rising. >>> Today 150 and rising. So it is slowly shifting towards what a z3801 >>> as an example will do. >>> Also ultimately it will look like an example Antony sent me. Simply noisy. >>> The 3801 is fairly smooth. >>> >>> So I sense my earlier concern of a "Bad box" is wrong. Pretty happy >>> about that. >>> Regards >>> Paul >>> WB8TSL >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> _______________________________________________ >>> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >>> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >>> and follow the instructions there. >>> >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to >> https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
