At most you need 2.4A (when the two OCXOs are heating up): a 2.5A supply is needed.
On Fri, Nov 21, 2014 at 6:25 PM, <planoph...@aei.ca> wrote: > Good day all, > > I have been following the discussions as best as I could. I recell seeing > the question asked or at least theorized as to what is the power > requirements of these units - either individually or together. > > I have reviewed all messages or at least all that I can find in these > threads but I couldn't find a definitive answer unless of course the > answer is in one of the responses hiding where I haven't looked. > > I purchased a set of these modules and they are currently in transit but > I don't have a 24V DC supply at the moment. > > So, in order to try and get ahead before the arrival of these modules I > would like to at least plan out if not get a suitable power supply > ready. I don't want to over specify by too much and worse yet, under > specify. > > Has anyone actually made any power used measurements of these modules? 2A > average, 4A peak? Somewhere inbetween or more? > > cheers, Graham ve3gtc > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.